Concrete Protection Solutions

Range of floor and wall protection coatings for a number of uses ranging from epoxy to Polyurethane flooring. The properties of the surface can be changed from the addition of adhesive properties to water and corrosion resistance. The surface also becomes resistant to chemical damage. 

34 AC – Anti Carbonation

A pigmented solvent-based acrylic concrete coating formulated using proven methacrylate resins to provide long-term protection against corrosion and staining of carbonation for concrete, masonry, and brickwork surfaces in an industrial environment.

  • Excellent alkali and fungal resistance
  • Excellent adhesion for concrete & masonry
  • UV resistant
  • Excellent weather ability
  • Excellent performance on old & new painted surfaces
  • Excellent Anti-Carbonation properties for reinforcing concrete

Typical Applications:

Where new and existing concrete and masonry structures require protection like car parks, commercial and industrial buildings, bridges, subways, high-rise flats, roofing, etc.

Substrate:

Concrete

Type of Product:

Top Coat

Categories:

  • Concrete Protection System
  • Engineering Product Range

45-DC Polyurea

VersaFlex USA

A fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomeric spray coating. Produces an extremely tough film at all thicknesses, will not hydrolyze, leach or contaminate other materials, and is bondable and paintable.

  • Low permeation & excellent thermal stability 
  • Direct food contact approved
  • 100% solids, no VOC’s
  • Tough elastomeric membrane 
  • Minimal downtime

Typical Applications:

It can be used in transitional areas along with interior or exterior applications. Below & above-grade waterproofing, water & wastewater treatment, food processing facilities, pulp & paper mills, parking garage decks, bottling & canning facilities.

Substrate:

Concrete

Type of Product:

Top Coat

Categories:

  • Concrete Protection System
  • Engineering Product Range

Chlorinated Rubber Finish

Based on unmodified chlorinated rubber resin. When used in combination with suitable primer, the system exhibits exceptional water Impermeability, resistance to salt spray, spillage & fumes of most acids, salt solutions, alkalis, bleaching agents, and corrosive gases.

  • Excellent chemical resistance
  • Single pack product
  • Resistance to molds and fungal growth 
  • Recoatable

Typical Applications:

Fertilizer plants, plating shops, paper mills, breweries, exterior coatings on chemical storage tanks, and in the mining industry.

Substrate:

Concrete / Metal

Type of Product:

Top Coat / Chlorinated Rubber

Categories:

  • Metal Protection System
  • Engineering Product Range

Chlorinated Rubber Primer

Kan-Cor

Based on unmodified chlorinated rubber resin. When used in combination with KAN- Cor CR finish, the coating system exhibits exceptional water impermeability, resistance to salt spray, spillage and fumes of most acids, salt solutions, alkalis, bleaching agents, and corrosive gases.

  • Excellent water impermeability 
  • Salt spray resistance
  • Withstands fumes and splashes of most acids 
  • Resist alkalis & other chemicals
  • Easy to recoat

Typical Applications:

Concrete, plaster, and masonry surfaces, fertilizer plants, plating shops, and gas works.

Substrate:

Concrete / Metal

Type of Product:

Primer

Categories:

  • Metal Protection System
  • Engineering Product Range

CR-Road Marking Paint

KAN-Mark

It is a single-pack fast-drying coating based on a durable alkyd modified chlorinated rubber resin. It is most suitable for concrete and bitumen surfaces without bleeding or discoloration, providing clean lines of high visibility.

  • Durable
  • Single pack 
  • Fast drying 
  • No bleeding
  • No discoloration

Typical Applications:

Curb stones, roads, and pavements

Substrate:

Concrete / Metal

Type of Product:

Top Coat

Categories:

  • Traffic Safety Solution
  • Engineering Product Range

FSS 50DM – Polyurea

Kaizen Paint

A fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer designed to be durable in a wide range of environments. FSS 50DM produces an extremely tough film at all thicknesses. It is a super coating designed specifically to receive a constant or intermittent attack from contained materials and abrasive action

  • Waterproofing
  • Odourless – no VOC
  • Direct food contact approved
  • Installation temperatures from – 28.9°C to +148.9°C 
  • Fast return to service

Typical Applications:

Chemical plants, Food processing facilities, Tank linings, Chemical plants, Food processing facilities, Tank linings.

Substrate:

Metal

Type of Product:

Top Coat

Categories:

  • Metal Protection System
  • Engineering Product Range

Noxyde

Rust-Oleum, USA

A single component, rust preventative water-based acrylic elastomeric coating. This self-priming, high build coating is designed for minimally prepared sound rusted or clean steel in mild to moderate industrial environments.

  • High-performance product
  • Self-Priming
  • Unrivalled corrosion protection 
  • 200% elasticity
  • Protects against cracking & peeling 
  • UV resistant
  • Fulfils the requirement for corrosively class C5 (M) high as defined by ISO standard 12944

Typical Applications:

Iron, steel, special alloys, galvanized and metalized iron, and steel.

Substrate:

Concrete / Metal

Type of Product:

Primer / Top Coat

Categories:

  • Metal Protection System
  • Engineering Product Range

Self-Levelling Epoxy System

Kan-Krete

A two-pack, easy to apply, self-levelling Epoxy floor coating. This self-levelling epoxy is a high-performance, chemically cured, solvent-free floor coating with excellent chemical, corrosion, moisture, stain, and abrasion resistance.

  • Chemical & moisture resistant 
  • Excellent abrasion resistivity 
  • High build
  • High solids
  • Seamless finish

Typical Applications:

Electric plants, food processing plants, hospitals, pharmaceutical plants, laboratories, corridors, public housing and buildings, OEM plants, and Showrooms.

Substrate:

Concrete

Type of Product:

Top Coat

Categories:

  • Concrete Protection System
  • Engineering Product Range

Thermoplastic BS3262 – Road Marking Paint

KAN-Mark

KanMark Thermoplastic Road Marking Paint is a premium product for road safety marking with excellent durability and high reflective properties. This product provides a long-lasting, highly visible road lane marking and produces an audible warning to any motorist when trafficked upon.

  • High Retro-reflectivity
  • Excellent weatherability
  • Excellent durability and adhesion 
  • High visibility
  • Conforms to “BS” specifications, 3262: Part 1/1989. 

Typical Applications:

Roads, pavements, runways, and airfields

Substrate:

Asphalt/Driveways

Type of Product:

Highway / Road Lane Marking

Categories:

  • Traffic Safety Solution
  • Engineering Product Range

VT40 – Polyurea (Extreme Chemical Resistance)

Versaflex, USA

A combination of Viton and PTFE, offers outstanding chemical, temperature, and permeation resistance. It is designed for use in severe-duty environments subject to chemical and heat exposures.

  • Excellent resistance to most harsh chemical environments. 
  • Continuous operating temperature from -40°C to +200°C
  • 250% elongation.
  • Very low coating permeability.
  • Excellent weather and UV resistance.

Typical Applications:

Chemical factories, Laboratories, gas stations, etc.

Substrate:

Metal / Concrete

Type of Product:

Top Coat

Categories:

  • Metal Protection System
  • Engineering Product Range

Zinc Phosphate Primer (Alkyd)

Kan-Alko

A fast-drying alkyd primer containing zinc phosphate as an anti-corrosive pigment. It is used for the protection of structural steel in mild industrial and commercial environments.

  • Non-toxic
  • Air-dry coating 
  • Anti-corrosive
  • Lead-free primer 
  • Easy Application

Typical Applications:

Structural steel, beams, plates, pre-fabricated structures, building frames, bridges, towers and tanks, impermeability, salt solutions, alkalis, bleaching agents, and corrosive gases.

Substrate:

Metal

Type of Product:

 Primer / Alkyd

Categories:

  • Metal Protection System
  • Engineering Product Range