Architectural Coatings

Red Oxide Primer

Solvent-Based

Kaizen Red Oxide Primer is a solvent-based, single component, anti-corrosive primer for ferrous and non-ferrous metals including steel, zinc, and galvanized iron. It protects iron and steel surfaces from corrosion in mild conditions. It is suitable for both interior and exterior use.

 Kaizen Red Oxide Primer is used to protect steel after fabrication when blasting is not feasible.

Coverage (Spread rate by brush):

13-15 m2 per liter per coat 

Application:

Brush or Sprayer

Available Sizes:

0.91 liters & 3.64 liters

Categories:

  • Architectural Product Range
  • Metal Protection Solutions

Wall Primer & Sealer

Oil-Based

Kaizen Oil-Based Wall Primer & Sealer is a solvent-based primer. It provides excellent bonding between the surface and top coat and is most suited for surfaces, which experience constant contact and mishandling. Kaizen Oil-Based Wall Primer & Sealer is recommended when applying water-based paint to existing oil-based paint.

Coverage:

12-14 m2 per liter per coat

Application:

Brush, Roller or Sprayer

Available Sizes:

3.64 liters & 14.56 liters

Categories:

  • Architectural Product Range
  • Wall Protection Solutions

Wall Primer & Sealer (A915-0075)

Water-Based

Kaizen Water-Based Wall Primer & Sealer is an alkali-resistant primer for masonry surfaces, which works on both interior and exterior masonry surfaces. It is used to seal the surface and provides good adhesion for the topcoat. It is convenient to use because it dries quickly and only needs one coat to seal the surface. Multiple coats may also be applied based on the applicator’s preference. It is most suitable for large paint jobs where a swift application is required.

Coverage (Spread rate by brush):

16-18 m2 per liter per coat

Application:

Brush, Roller, or Sprayer

Available Sizes:

 4 liters & 16 liters

Categories:

  • Architectural Product Range
  • Wall Preparation Solutions